Cobham Gaisler AB provides IP cores and supporting development tools for embedded processors based on the SPARC architecture. We specialize in digital hardware design for both commercial and aerospace applications

GR-CPCI-GR740 Quad-Core LEON4FT Development Board

The GR-CPCI-GR740 development board has been designed to support the development and fast prototyping of systems based on the Cobham Gaisler GR740 quad-core 32-bit fault-tolerant LEON4FT SPARC V8 processor.

The GR-CPCI-GR740 Development Board comprises a custom designed PCB in a 6U Compact PCI format, making the board suitable for stand-alone bench top development, or if required, to be mounted in a 6U CPCI Rack, or in a bench-top enclosure. The principle interfaces and functions are accessible on the front and back edges of the board, and secondary interfaces via headers on the board. The  GR-CPCI-GR740 Development Board comes as standard with a dedicated accessory board which provides access to additional I/O interfaces.

GR-CPCI-GR740

Features

  • GR740 quad-core 32-bit fault-tolerant LEON4FT SPARC V8 processor
  • cPCI interface (32 bit) configurable with jumpers for Host or Peripheral operation
  • PCI arbiter implemented in separate FPGA
  • On-board memory:
    • SDRAM SODIMM module
    • Parallel Boot Flash 64 Mbit (16 bit wide x 4M or 8 bit wide x 8M)
    • Additional memory via memory expansion connector
  • Power, reset, clock and auxiliary circuits
  • Interfaces at front edge of board:
    • Dual RJ45 10/100/1000 Mbit GMII/MII Ethernet interface (KSZ9021GN)
    • 8 port SpaceWire interface (8x MDM9S)
    • SpaceWire debug communications link (MDM9S)
    • 16-bit General purpose I/O (34 pin 0.1" ribbon cable style connector)
    • FTDI Serial to USB interface (FT4232HL with USB-Mini-AB)
    • LED indicators connected to GPIO signals
    • DIP switch for bootstrap and PLL interface configuration
    • Push button switch for reset and toggle switch (on/off) for DSU break
  • Interfaces at back edge of board:
    • Compact PCI interface (32-bit), configurable for Host or Peripheral slot
    • Input power connector: 5V nominal
  • Interfaces on-board:
    • SPI  interface on pin headers
    • JTAG Debug interface
    • 4-pin IDE style power connector
    • Assorted jumpers and Test Points for configuration and test of the board
  • To accommodate the optional/alternative I/O interfaces the accompanying accessory board provides
    • Dual MIL-1553 Interface (Transceiver/Transformer and D-sub 9 Male connector)
    • Dual CAN Interface (CAN Transceivers and two D-sub 9 Male connectors)
    • Two Serial UART (RS232 transceivers and two D-sub 9 female connectors)
    • SPI interface (available via 10 pin header)

Note: The product picture on this page show the board with a socket holding the GR740. The standard configuration of the GR-CPCI-GR740 is to have the GR740 device directly soldered on the PCB.

Documentation

Document File
GR740 device information GR740 product page
GR-CPCI-GR740 User's Manual alt GR-CPCI-GR740-UM.pdf (September 2017)
GR-CPCI-GR740 Quick Start Guide altqsg_740.pdf (June 2017)
GR-CPCI-GR740 Quick Start Guide Board Package gr-cpci-gr740-bp.zip (May 2017)
GR-CPCI-GR740 Documentation CD (ISO) (password protected) GR740_201600526.iso (May 2016)